SPECIFICATIONS FEATURES DMX Input: 3 pin XLR standard (5 pin available by request)
DMX Output: 3 pin XLR standard (5 pin available by request)
Outputs 1-4: 32 watts max per output, Can power up to 8 x 16” RGB boards per output. 50’ max home run cable per output
Input Voltage: 24 VDC from ALS-LED 180 PS
Input Power:
180 watts
Input Current:
30ma. / 8A
Dimensions: 6.0” (l) x 5.0” (w) x 1.75” (h)
152.4 mm (l) x 127.0 mm (w) x 44.5 mm (h)
Environmental: -40F / -40C to 122F / 50C
Warranty: 2 years
DESCRIPTION:
The eLum™ RGB Controller is Ideal for Architectural, Retail, Entertainment, Specialized venues and other installations. This controller is designed to receive DMX512 protocol and to drive a number of Advanced Lighting’s LED strips. The eLum Controller uses 24VDC power and three 0.5 - 5V analog control signals to vary the intensity of the red, green, and blue LED’s. The controller’s DMX input is fully opto-isolated and is bi-directional thus allowing the implementation of ESTA’s RDM protocol. RDM is implemented to allow remote setting of the interface’s DMX address and to gain access to the built-in effects package.
Smooth RGB color mixing and full range dimming allow for 16.7 million colors and a variety of effects including variable speed cross fades, variable speed color changes, strobes and more. The unit may be operated with DMX controllers, in master / slave synchronization, with other units (with or without a controller), and in stand-alone mode with 49
pre-programmed effects.
•
Unit is fully opto-isolated and bi-directional for Remote Device Management (RDM)
•
Rugged ABS housing with mounting flanges
•
Capable of master/slave or running pre-programmed shows
•
Silent operation
•
DMX pass through for daisy chain configurations
•
Easy dip switch settings for addressing or pre-programmed effects
