• 12 DMX channels with 4 addresses
• Powers & Controls up to 85ft. of ELum RGB
• Indoor/Outdoor weather grade
• Scalable for small to large installations using the eLum 3200 Expansion Module.
• System Integration

Specifications
Dimensions: 12.2”H X 4.7”W X 3.8”L

Input Voltage: 88-264VAC

Input Current Max: 15A/115V

Max eLum per unit: 70 - 16”

Max eLum per outlet: 6-16”/12 - 8”

Control Protocol: DMX 512

DMX Input: 5-pin XLR male panel mount

DMX Output: 5-pin XLR female panel mount

Housing: Powder coat aluminum - all weather.

Mounting: Wall mount flange.

Environmental: 0C/32F to +40C/104F

Weight: 5 lbs.

• Capable of operating as eLum 3000 expansion module or as stand alone power supply/controller using eLum 500 effects module mounted on board
• Powers & Controls up to 80ft. of eLum RGB
• Scalable for small to large installations using additional 3200 units in daisy chain configuration.
• System Integration

Dimensions: 12.2”H X 4.7”W X 3.8”L

Input Voltage: 88-264VAC

Input Current Max: 4A/115V

Max eLum per unit: 60 - 16”

Max eLum per outlet: 7-16”/15 - 8”

Control Protocol: DMX 512

Housing: Powder coat aluminum.

Mounting: Wall mount flange.

Environmental: 0C/32F to +40C/104F

Weight: 5 lbs.

• Capable of operating as eLum 3200 on board effects controller or as stand alone power supply/controller.
• Powers & Controls up to 16ft. of eLum RGB as stand alone unit.
• DIP switch and RGB manual select for custom settings and timings
• Separate RGB dimmer control for manual brightness control.
• System Integration

Specifications
Dimensions: 5.5”H X 3.3”W X 1.35”L

Input Voltage: 24VDC

Input Current Max: 2.5A

Input Power jack: 2.1mm, center positive

Input Power: 60W max.

Housing: ABS Plastic.

Mounting: Wall mount flange.

Environmental: 0C/32F to +50C/122F

• Benefits
• Ideal for smaller installations
• Connects up to 16 feet of strip light per unit
• Controls color-change transition timings
• Easy to use - plugs directly into sidemount of light strip
• Low cost solution for
  implementing color-change
  effects
• Requires external 24 VDC PowerSupply

Specifications
Input Voltage: 24VDC

Input Current Max: 2.5A

Input Power Connector: 5 position JST 55B-XH-A-1

Input Power: 60W max.

Maximum # of feet driven: 16 ft. w/60W power supply

Modulation Type : Analog steady rising, falling ramp

Cycle Time Rise-fall: 5 seconds

PCB Material: 94-VO FR4 Epoxy Glass .062"

Size: 1.3" x 0.650"W x 0.62"H

Environmental: 0C/32F to +50C/122F

• Benefits
• Easy control with/without a computer
• USB/Ethernet - DMX Stand Alone Interface
• 248/512 Channels, 8 Ports
• 255 Scenes in direct access
• Software

Environment
The Sunlite Easy Stand Alone DMX
controller/interface is available as a USB version, and an Ethernet based version.
The Ethernet DMX 512 interface (IP version) makes it possible to control either locally or via Internet. This is especially useful for an architectural installation that can be controlled anywhere worldwide. The IP version controls up to 512 channels and includes a real-time clock.  The Easy Stand Alone software has been designed for users mainly seeking complete ease-of-use. The Stand Alone Controller allows for scenes to be stored into the box without a computer use. Contact a ALSI sales rep for more information.

• Benefits
• Operates 4 LiveLED™ Fixtures
• Indoor / Outdoor
• 46 On Board Programmed Effects
• DMX 512 With Master/Slave Via Standard 3 Pin XLR Connectors

Specifications
Voltage: 85-265 VAC 50/50 Hz Auto-Regulated
Driver: Proprietary LED driving technology driving a total of 21 LED’s per fixture (9 red, 6 green, 6 royal blue)
Weight: 4 lbs.
Dimensions: 11 ” Wide x 4” Height x 6” Depth